1982-2002 Chevrolet UMI Weld In Torque Arm, Straight Cross Member, Red 2236-R

UMI's weld-in torque arm is a great way to get UMI quality and performance in your 1982-2002 Chevrolet. The shortened torque arm length improves instant center and provides reduced 60 ft times and enhanced forward traction. The adjustment feature allows for optimizing the pinion angle and ensures a vibration-free driveline at any ride height. This unit is designed with a straight front cross member to clear tight fitting header/y-pipe set-ups.Since crossmember installation is weld in, you have the ability to raise or lower the crossmember before welding for perfect clearance.Torque Arm Benefits:Removes torque arm from transmission tail shaft, protecting transmission from damageEliminates wheel hop and solves traction problemsAllows for on-car pinion angle adjustmentsPolyurethane bushings designed to keep road noise at a minimumFront mounting point utilizes a greaseable pivot pointFeatures:Torque arm constructed of 1.250 in. x 0.120 in. DOM steel tubingCrossmember constructed of 1.500 in. x 0.120 in. DOM steel tubingTIG welded 4140 chromoly tube adaptersOn-car adjuster built using 4140 chromoly steel & heat treated for maximum strengthPolyurethane bushings are greaseable to prolong bushing lifeLaser cut plates ensure hole to hole accuracyRear mounting plates use 0.375 in. thick mild steelFits stock rear end as well as 12-bolt, 9 inch & S60 rear end housingsBrilliant durable powder coat

Manufacturer Part Number : 2236-R

Part Notes:

Crossmember installation requires welding and cutting to complete installation. Torque arm must be installed with 2-point subframe connectors.