1993-2002 Chevrolet UMI Tunnel Brace Mounted Torque Arm, Stock Exhaust, Black 2200-B

UMI's tunnel mounted torque arm for 1993-2002 Chevrolet is a street/strip powerhouse that has been dropping 60ft times for years. The 2200 replaces the factory torque arm with a shorter, more rigid design that optimizes instant center, shortens response time, and helps improve launch. WIth the torque arm removed from the transmission, cracked tail housings are eliminated. The tunnel brace bolts directly to the existing floor pan and features poly bushings as well as a bracket system to accept the UMI-2204 drive shaft loop. The arm is adjustable to optimize pinion angle and also instant center location.Features:Protects transmission from damage by relocating torque arm to tunnel areaReduces wheel hop and solves traction problemsAllows for easy on-car pinion angle and instant center adjustmentsGreaseable polyurethane bushings designed to keep road noise to a minimumBolt-on design requires no welding or drilling during installationIncludes drive shaft loop mount for addition of optional drive shaft loop UMI-2204Fabricated from 1-1/4 inch USA DOM seamless steel tubingCrossmember uses heavy duty USA rectangular tubingHouse made 4140 CrMo tube adapters and adjusterStrong 3/8 in. thick mild steel rear mount designed to fit stock axle housing as well as Moser 12-bolt, Moser 9 inch with bracket, Strange S60 and Quick Performance 9 inch with bracketDurable UMI gloss powder coat100% manufactured, tested and raced out of Philipsburg, PA - USA

Manufacturer Part Number : 2200-B

Part Notes:

UMI-2200 is designed to clear with factory exhaust systems and vehicles running shorty headers and y-pipe that bolt into existing location of stock manifolds. It will also clear y-pipes that bolt to factory exhaust manifolds. This setup may not clear lower hanging long tube headers. Torque arm will clear Kooks long tube headers with Kooks y-pipe. It will also clear similar tight fitting long tube header setups.