1962-2002 Chevrolet Holley Mid LSA, LS Accessory Drive Bracket Kit Power Steering, Natural 20-165

1962-2002 Chevrolet Holley Mid LSA, LS Accessory Drive Bracket Kit Power Steering, Natural. If you're looking to swap an LSA or LS engine into your vehicle but your engine didn't come with a power steering pump or the factory setup is too wide to fit properly in your bay, Holley has the answer. These new LSA Accessory Drive Kits offer clean, economical mounting of all LS engine accessories. The 20-165 Power Steering Bracket pulls the pump in closer toward the engine when compared to the original LSA accessories, giving more clearance in swap applications. Also, Power Steering Hard Line Adapter 197-207 is not required, but makes a potentially daunting plumbing task quick and painless. There is no doubt this bracket kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come from factory this way.Features: Compatible with the original LSA damper and pulley and similar aftermarket versionsCompatible with Holley�s Integral Reservoir and Type II Power Steering Pump PN 198-101P/S hard line adapters available PN 197-207 Not includedCompatible with Holley PN 20-160 compact SD7 AC kitCompatible with LSA and 2010-15 LS Camaro water pumpsNotably more clearance to swap applications than other optionsOE pulley ratios for optimal accessory performance, allows for larger SC crank pulleyOriginal Equipment look � Available in Natural and Black Finishes

Manufacturer Part Number : 20-165

Part Notes:

Torque M8 bolts to 18 ft.lbs. to attach bracket to pump and banjo bolt to 25 ft.lbs. Torque M10 bolts to 36 ft.lbs. See 1997-2013 Corvette Repair Manual for additional PS Pump and pulley installation procedures. This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.