1982-2002 Camaro UMI Transmission Mounted Torque Arm, Black 2206-B

An affordable suspension upgrade is now available for your Camaro. This non-adjustable transmission mounted torque arm features all the same build specifications as our adjustable units for a fraction of the price. The factory 1982-2002 Camaro torque arm bends, breaks and flexes under the smallest loads causing inconsistency and down time to the driver. This problem is a simple fix by adding a direct replacement torque arm from UMI Performance. This tubular torque arm bolts directly in place of the factory unit using existing mounting holes and requires no drilling or welding, it is a direct bolt-on. The torque arm is designed to eliminate wheel hop under hard acceleration and reduces 60-foot times instantly. This non-adjustable unit is preset at -2 degrees of pinion angle to insure best traction and performance from the vehicle, no adjustments need made, just bolt on and go!
Also included with this tubular set-up is a new low deflection Energy Suspension front bushing designed to replace the stock rubber bushing and bolts directly in the existing clamshell. Fits GM 10-Bolt rear-ends, Moser and Strange 12-Bolts as well as most 9 inch housings. Please Note: The -2 degree setting is on a stock ride height vehicle.
Torque Arm Benefits:

• Eliminates wheel hop and solves traction problems
• Reduces front end nose dive during braking
• Solid construction prevents breakage and reduces down time
• Polyurethane bushing eliminates deflection
• Bolt-on design requires no welding or drilling

Features:

• Constructed of 1.250 in. x 0.120 in. DOM seamless steel tubing
• All mounting plates are CNC machined to ensure hole to hole accuracy
• Rear mounting plates use 0.375 in. thick mild steel
• Complete arm features MIG welding to ensure strength
• Brilliant durable powder coat

Manufacturer Part Number : 2206-B

Part Notes:

1982-1984 models require a 1985 or newer clamshell mount. Requires grinding on aftermarket 9 inch housings.