1993-2002 Camaro UMI Tunnel Brace Mounted Torque Arm with DS Loop, Stock Exhaust, Red 2201-R

UMI's tunnel mounted torque arm for 1993-2002 Camaro is a street/strip powerhouse that has been dropping 60ft times for years. The UMI-2201 replaces the factory torque arm with a shorter, more rigid design that optimizes instant center, shortens response time, and helps improve launch. WIth the torque arm removed from the transmission, cracked tail housings are eliminated. The tunnel brace bolts directly to the existing floor pan and features poly bushings as well as a robust bolt-on driveshaft loop. The arm is adjustable to optimize pinion angle and also instant center location.
Features:

• Protects transmission from damage by relocating torque arm to tunnel area
• Reduces wheel hop and solves traction problems
• Allows for easy on-car pinion angle and instant center adjustments
• Greaseable polyurethane bushings designed to keep road noise to a minimum
• Bolt-on design requires no welding or drilling during installation
• Bolt-on driveshaft loop is easily replaceable if damaged from a driveshaft failure
• Driveshaft loop can be removed from tunnel mount for easy installation and can also be adjusted slightly for perfect driveshaft centering on lowered cars
• Fabricated from 1-1/4 inch USA DOM seamless steel tubing
• Crossmember uses heavy duty USA rectangular tubing
• House made 4140 CrMo tube adapters and adjuster
• Strong 3/8 in. thick mild steel rear mount designed to fit stock axle housing as well as Moser 12-bolt, Moser 9 inch with bracket, Strange S60 and Quick Performance 9 inch with bracket
• Durable UMI gloss powder coat
• 100% manufactured, tested and raced out of Philipsburg, PA - USA

1993-1997 Models: This unit is designed to clear with factory exhaust systems and vehicles running shorty headers and y-pipe that bolt into existing location of stock manifolds. It will also clear y-pipes that bolt to factory exhaust manifolds. This setup may not clear all lower hanging long tube headers.
1998-2002 Models: This unit is designed to clear with factory exhaust systems and vehicles running shorty headers and y-pipe that bolt into existing location of stock manifolds. It will also clear y-pipes that bolt to factory exhaust manifolds. Torque arm will clear Kooks long tube headers with Kooks y-pipe. It will also clear similar tight fitting long tube header setups. This setup may not clear all lower hanging long tube headers.

Manufacturer Part Number : 2201-R