Mike’s 1970 Chevelle SS

Built From The Ground Up

Mike’s 1970 Chevelle SS

When you go to the deli, what do you order? Maybe a turkey club? What about an Italian combo? Perhaps a pile of dirt, a slice of 1970 Chevelle in the middle, and a ’55 Chevy on top?

Believe it or not, Mike found this Chevelle in a junkyard in Missouri sandwiched under a 1955 Chevy four door sedan! The good news was that the car on top had provided some protection from the elements over the years. The bad news was figuring out a way to get the ’55 off! Upon closer inspection, only minimal damage was noted, and the Chevelle was dislodged, then loaded up and taken home.

After sandblasting the body, Mike found that it was actually in pretty decent shape. He decided to replace the quarter panels, inner and outer wheel houses, floor pans, and trunk pans for good measure. The front clip was donated from a 1972 Chevelle that had been cloned to a 1970 SS and he traded a 1972 dash to his friend for the correct 1970 dash unit.

The goal was clear: Retain an original Super Sport appearance while using as much modern technology as possible. Mike says, “I’m sure I missed plenty of good technology.” (Read the list of following upgrades, we think you’ll agree that this is a pretty high tech Chevelle after all!)

The 1973 454 that lurks beneath the hood was bored 0.30″ over and the stock crank was polished and balanced. The motor contains SRP pistons (10:1), Howard’s camshaft (.352 lift with .230 duration intake & .335 lift with .236 duration exhaust), Brodix Race Rite big oval port heads, Merlin single plane intake, ARP bolts, Holley 770 CFM Street Avenger carburetor, Pertronix Ignitor II point conversion kit with Flame Thrower coil, Doug’s shorty headers, Flowmaster dual exhaust with DMH E-cutouts by Muffle Mart (owned by Marty Allison of Rolla, MO). A built TH400 with a 2800 RPM billet converter does the shifting.

The car was born on last week of October 1970 and reborn in the first week of May 2007.

Mike would like to send out the following special thanks:

Ground Up, Inc.
Richard Recuparo (decals and an excellent website: my70ss.com)
Mark Shultz (machine shop)
Wayne Miles (www.gmtiltsteering.com)
Dave Hacker (www.dmhperformance.com)
Chip Woyner (www.powersteering.com)

Check out http://thegiftisyou.com/stories.html to see the presentation Mike worked on during the cars restoration history.

Ground Up Parts Featured In This Build

1970 Chevelle Bumper Kit With SS Pad Complete

Part #: BUMPER-KIT70RK

$378.97

You Save: 15%

1970-1972 Chevelle Cowl Induction Hood Emblem

Part #: TG-567

$32.95

You Save: 16%

1970-1972 Chevelle Wheel Opening Molding Set

Part #: KWO-70K

$79.95

You Save: 20%

1970 Chevelle Bumper Front

Part #: MAU-70F

$179.95

You Save: 20%

Shop our huge selection of Chevelle Parts!

1964-1977 Chevelle & Malibu Parts

We want to see your Built From The Ground Up Ride!

Submit your car to be featured here!

Share this car with your friends!

Share on facebook
Facebook
Share on twitter
Twitter
Share on email
Email

More Articles From Ground Up SS396.com

1966 Chevelle

Patrick S’s 1966 Chevelle SS396

Some of Patrick’s earliest childhood memories were of the iconic taillights and trim covered pieces on the rear ends of 1966 Chevelles and Malibus. Patrick’s been looking for a mid-sixties

Read More »
1967 Chevelle

Ron V’s 1967 Chevelle

This 1967 Chevelle had been spotted by Ron back in 2010 at a Goodguys show in Des Moines, Iowa. He approached the owner and they agreed on a price after

Read More »
1966 Chevelle

Troy B’s 1966 Chevelle

Troy was told by a friend of his that this 1966 Chevelle was sitting on Yucaipa Blvd when he was home on break from working overseas back in 1991. This

Read More »

Follow Us On Social

Now Hiring in Florida!

Looking to get into the Automotive Industry? Here's your chance, click below to see what positions are opening soon!

Parts Catalog

Chevelle & El Camino, Camaro, & Nova
Free

We Want To See Your Car!

Submit your car to be featured today!