1962-2002 Chevrolet Holley Low LSA,LS Accessory Drive Bracket Kit Natural 20-163

1962-2002 Chevrolet Holley low LSA,LS accessory drive bracket kit natural. If you're looking to swap an LSA into your vehicle but your engine didn't come with accessories or the factory setup is too wide to fit your project, Holley has the solution. Rather than trying to track down each individual accessory you need, the LSA Accessory Drive Kit offers the total package in a clean, economical configuration in your choice of Natural or Black Finishes. It is even designed to work with the original LSA damper/pulley and similar aftermarket versions. Holley's LSA complete accessory system has all accessories pulled in tighter than other accessory drives. The design offers superb engine visibility to show off your horsepower, not your accessories. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.This kit looks truly at home on the LSA engine, so much so that nobody will realize it didn't come this way from the factory.Features: Compatible with the original LSA damper pulley and similar aftermarket versions Compatible with LSA and 2010-15 LS Camaro water pumpsAll brackets, pulleys, and belts are supplied for both the supercharger and all accessoriesNotably more clearance for swap applications than other optionsIncludes Holley compact SD7 AC kitIncludes LT1 style premium 150-amp alternatorIncludes Holleys Integral Reservoir and Type II Power Steering Pump and Bracket with baffled reservoirPower Steering Hard Line Adapter and PS Pulley Also IncludedOE pulley ratios for optimal accessory performance, allows for larger SC crank pulleyOriginal Equipment look  Available in Natural and Black Finishes

Manufacturer Part Number : 20-163

Part Notes:

This drive works with the original LSA damper,pulley and similar aftermarket versions IMPORTANT NOTE IF PAINTING COMPONENTS: The alternator and AC compressor ground through their mounting brackets. If painting or coating the brackets, the mating surfaces must all be bare metal allowing a ground path from the accessories' mounting feet to the engine block and ultimately the negative terminal on the battery. Helpful hint: When wiring the alternator, install the included 197-400 plug into the alternator. Next, connect the yellow wire to switched voltage that is "on" when the key is in the run position. If the vehicle has a "charge indicator light", the yellow wire can be connected to that circuit. The P/S pulley must be installed using an installation tool that can be rented at most auto parts stores. Incorrect installation of this pulley may damage the PS pump internals. When installed, the pulley bore face should be flush with the end of the pump shaft. This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.