The Holley EFI Terminator X Stealth 4500 EFI system from Holley features 8, 100LB/HR Fuel Injectors capable of supporting up to 1500 HP naturally aspirated or 1250 HP on forced induction applications. The Holley EFI Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, allowing you to easily convert your 4500 equipped 800+ horsepower dragster or door car!Features:Bolt on 4500 Flange Carburetor ReplacementSupports up to 1500 HP Naturally Aspirated or 1250 HP Forced Induction with Eight 100 Lb/Hr Injectors2.125” Throttle Plates, Flow 1440 CFM for large cubic inch enginesGen 3 Ultra Dominator Style 4 Bolt Air Cleaner Flange offering a variety of air cleaner optionsExternal fuel pressure regulator required, such as 12-848Integrated ignition timing controlHigh Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge DisplaysSimple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!OEM Style TPS/IAC, for years of dependable service.Included weld-in O2 sensor bung for the exhaust ensures a leak free oxygen sensor installationBuilt in 1bar MAP Sensor, vacuum hose adapters included (1/8th – ¼ and 3/16ths) - or for Boosted applications, you can disable the internal MAP sensor, and utilize an external MAP Sensor, the harness comes with the connector terminated, making the installPlug and play with Holley EFI Accessories, such as the 12.3” and 6.86” Pro Dash; CAN EGT; and Digital Analog style EFI gaugesAvailable in 2 finishes, Shiny and Black
Manufacturer Part Number : 550-1071
Emissions
3
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
The following vehicles are considered Emissions Controlled Vehicles:
- 1966 and newer U.S. manufactured California Certified vehicles
- 1968 and newer U.S. manufactured Federally Certified vehicles
- 1968 and newer Foreign manufactured vehicle