1967-1988 Camaro Holley 750 CFM Aluminum Street HP Carburetor, Mechanical Secondaries 0-82751SA

Tire smoking performance has never been so affordable! Holley is proud to introduce the all new Aluminum Street HP. The all new Aluminum Street HPs weigh up to 40% less and are even easier on your wallet. They utilize the best features from Holley's Race Bred 4150 HP carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup to get outstanding throttle response, drivability and maximum performance from your Camaro. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.

Features:

• Aluminum construction for weight savings and long lasting good looks
• Optimized street/strip calibration for outstanding throttle response and drivability
• Contoured venturi inlet offers balanced airflow for increased horsepower
• Screw in air bleeds for precision tuning capabilities
• Four corner idle for precise idle control
• Mechanical secondaries for awesome tire turning performance
• Dual accelerator pumps for additional fuel under initial acceleration
• Dual feed fuel inlets for constant high volume fuel delivery
• 750 CFM
• Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
• 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
• Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.

Specs:

• Barrels: 4
• Booster: Down Leg
• Carburetor Use: Performance and Race
• CFM: None
• Finish: Shiny
• Fuel: Gasoline
• High Speed Air Bleed : 36
• Idle Air Bleed Size : 71
• Material: Aluminum
• Primary Main Jet : 77
• Primary Power Valve : 4.5
• Primary Pump Nozzle Size : 31
• Secondaries : Mechanical
• Secondary Main Jet : 84
• Secondary Pump Nozzle Size : 28
• Throttle Bore : 1.688 inch
• Venturii Size : 1.375 inch
• Warranty : Limited 90 Day

Manufacturer Part Number : 0-82751SA